GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1240893  Size: SH
  1. Remove the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the upper right DTM sensor electrical connector.
  3. Remove the upper right DTM sensor from the air distribution duct.

Installation Procedure


    Object Number: 1240893  Size: SH
  1. Install the upper right DTM sensor to the air distribution duct.
  2. Connect the upper right DTM sensor electrical connector.
  3. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement in Instrument Panel, Gages and Console.