GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2004 🢒 XLR 🢒 Preface 🢒 Cautions and Notices 🢒 Radio Front Speaker Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement in Instrument Panel, Gages, and Console.

    2. Object Number: 1237190 Size: SH
  2. Remove the 4 retaining screws from the speaker as required.
  3. Lift the speaker out from the I/P carrier to access the electrical harness.
  4. Disconnect the speaker wire harness.

Installation Procedure
  1. Position the speaker to the I/P carrier and connect the speaker wire harness.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1237190 Size: SH
  2. Install the speaker to the I/P carrier and secure the speaker with the 4 retaining screws.

    3. Tighten
    Tighten the screws to 2.5 N·m (22 lb in).

  3. Install the I/P trim pad. Refer to Instrument Panel Trim Pad Replacement in Instrument Panel, Gages, and Console.