For 1990-2009 cars only
Removal Procedure
- Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the right lower closeout panel.
- Remove the push-in retainers on the right lower closeout panel from the I/P lower support beam.
- Lower the closeout panel slightly, and carefully maneuver the left side of the closeout panel from above the driveline tunnel.
- Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
- Continue to lower the closeout panel, then pull to remove the closeout panel from the dash.
Installation Procedure
- Install the right closeout panel under the dash.
- Insert the I/P courtesy lamp down through the opening in the closeout panel.
- Raise the closeout panel slightly, and carefully maneuver the left side of the closeout panel into position above the driveline tunnel.
- Install the closeout panel push-in retainers to the I/P lower support beam.
- Align the I/P courtesy lamp to the closeout panel opening, then push to secure the lamp in place.
