Cleaning Procedure
Important: In order to maintain the proper component balance, contact surface taper and heat transfer, manual transmission flywheels are NOT to be machined.
- Clean the engine flywheel in solvent.
Caution: Refer to Safety Glasses Caution in the Preface section.
- Dry the engine flywheel with compressed air.
Inspection Procedure
- Inspect the engine flywheel hub spline for damage (1).
- Inspect the engine flywheel hub for cracks (2).
- Inspect the engine flywheel hub to plate rivets for damage or looseness (3).
- Inspect the engine flywheel plate for cracks (4).
- Inspect the engine flywheel plate rivets for damage or looseness (5).
- Inspect the engine flywheel ring gear welds that retain the ring gear to the engine flywheel for cracks (6).
- Inspect the engine flywheel ring gear teeth for damage (1).
- Inspect the engine flywheel for stress cracks at rivets (2).
- Inspect the engine flywheel for stress cracks at the engine flywheel to crankshaft mounting holes (3, 4).