Removal Procedure
- Remove the engine oil pan. Refer to
Oil Pan Replacement
.
- Remove the oil pump pipe support bracket nut.
- Remove the oil pump pipe bolt.
- Remove the oil pump pipe and screen assembly.
- Remove and discard the oil pump pipe and screen assembly gasket.
Installation Procedure
- Install a NEW gasket to the oil pump pipe and screen assembly.
- Install the oil pump pipe and screen assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil pump pipe and screen assembly retaining bolt and nut.
Tighten
• | Tighten the oil pump pick-up tube nut to 24 N·m (18 lb ft). |
• | Tighten the oil pump pick-up tube bolt to 10 N·m (89 lb in). |
- Install the oil pan. Refer to
Oil Pan Replacement
.