Removal Procedure
- Remove the console trim plate. Refer to
Console Trim Plate Replacement
.
- Grasp the I/P accessory trim plate at the top edge and pull rearward to
disengage the retaining clips.
Important: Do NOT damage the metal accent trim on the
trim plate.
- Disconnect the electrical connector at the hazard flasher switch.
- Remove the hazard flasher switch from the trim plate.
Installation Procedure
- Install the hazard flasher switch to the
trim plate.
- Connect the electrical connector to the hazard flasher switch.
- Install the I/P accessory trim plate securing the plate into the retaining
clips.
- Install the console trim plate. Refer to
Console Trim Plate Replacement
.