GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2005
🢒
XLR
🢒
Engine
🢒
Engine Controls - 4.6L (LH2)
🢒 Fuel Pump Control Module Replacement
Removal Procedure
Remove the left wheelhouse liner panel. Refer to
Rear Wheelhouse Panel Liner Replacement
in Body Rear End.
Disconnect the fuel pump module electrical connector.
Remove the nut (2) securing the fuel pump module (3) to the vehicle.
Remove the fuel pump module.
Installation Procedure
Insert the alignment tabs (4) of the fuel pump module (3) into the slots (5) in the body panel.
Position the fuel pump module (3) over the body attachment stud (1).
Install the nut (2) to the attachment stud (1).
Tighten
Tighten the nut to 12 N·m (106 lb in).
Connect the electrical connector to the fuel pump module.
Install the wheelhouse liner panel. Refer to
Rear Wheelhouse Panel Liner Replacement
in Body Rear End.