Removal Procedure
- Remove the right rear wheelhouse liner panel.
Refer to
Rear Wheelhouse Panel Liner Replacement
in Body
Rear End.
- Remove the EVAP canister access cover.
- Disconnect the fuel tank pressure sensor electrical connector.
- Remove the fuel tank pressure sensor by carefully prying the sensor out
of the fuel tank with a screwdriver.
Installation Procedure
- Lubricate the fuel tank pressure sensor
rubber grommet with clean engine oil in order to aid in installation.
- Install the fuel tank pressure sensor into the top of the fuel tank.
- Connect the fuel tank pressure sensor electrical connector.
- Install the EVAP canister access cover.
- Install the right rear wheelhouse liner panel. Refer to
Rear Wheelhouse Panel Liner Replacement
in Body Rear End.