GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  2. Object Number: 1174303  Size: MF
  3. Remove the screws (1) attaching the close-out panel (3) to the front fascia.
  4. Remove the push-in fasteners (2) attaching the close-out panel to the fascia.
  5. Remove the close-out panel (3).

Installation Procedure


    Object Number: 1174303  Size: MF
  1. Position the close-out panel (3) to the fascia.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the push-in fasteners (2) that attach the close-out panel to the fascia.
  4. Install the screws (1) that attach the close-out panel to the fascia.
  5. Tighten
    Tighten the screws to 3 N·m (27 lb in).

  6. Lower the vehicle.