Removal Procedure
- Open the door.
- Use a flat-bladed tool to remove the trim bezel from the door sill plate.
- Remove the retaining screws from the sill plate.
- Lift the door sill plate off of the rocker panel.
Installation Procedure
- Position the door sill plate to the rocker panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining screws to the door sill plate.
Tighten
Tighten the screws to 2.3 N·m (22 lb in).
- Install the trim bezel to the door sill plate.
- Close the door.