GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 XLR 🢒 Body 🢒 Roof 🢒 Folding Top Side Front Weatherstrip Retainer Replacement

Removal Procedure

    Object Number: 1111822 Size: SH
  1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation .

    2. The distance (A) from the windshield header to the leading edge of the folding top panel is 400 mm (15.75 in).

  2. Place a protective covering over the interior of the vehicle and the adjacent body panels.
  3. Remove the weatherstrip from the weatherstrip retainer. Refer to Folding Top Side Front Weatherstrip Replacement .

    4. Object Number: 1222612 Size: SH
  4. Using a grease pencil, mark the location of the weatherstrip retainer to the folding top panel.
  5. Remove the weatherstrip retainer screws.
  6. Remove the weatherstrip retainer from the vehicle.

Installation Procedure

    Object Number: 1222612 Size: SH
  1. Position the weatherstrip retainer to the vehicle.
  2. Install the weatherstrip retainer screws. Do NOT tighten.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Alignment the weatherstrip retainer to the marks on the panel.

    4. Tighten
    Tighten the retainer screws to 3 N·m (27 lb in).

  4. Install the weatherstrip into the retainer. Refer to Folding Top Side Front Weatherstrip Replacement .
  5. Remove the protective covering.
  6. Manually close the folding top. Refer to Folding Top Manual Operation .
  7. Cycle the folding top under power through one complete cycle in both directions.
  8. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation .