GM Service Manual Online
For 1990-2009 cars only

Adjustment Procedure


    Object Number: 1294372  Size: SH
  1. Place the folding top in the up position.
  2. Open the rear compartment.
  3. Place a protective covering over the interior and the adjacent body panels.

  4. Object Number: 1247426  Size: SH
  5. Loosen the screw (2) on the position sensor switch.

  6. Object Number: 1247429  Size: SH
  7. Verify that the pin (2) on the position sensor switch is positioned between the bracket (3) and the link actuator (1).
  8. Adjust the position sensor switch so that the link actuator (1) depresses the pin (2).

  9. Object Number: 1247426  Size: SH
  10. Apply LOCTITEâ„¢ Blue, GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the bolts.
  11. Notice: Refer to Fastener Notice in the Preface section.

  12. Tighten the position sensor switch screw (2).
  13. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).

  14. Remove the protective covering.
  15. Close the rear compartment.
  16. Cycle the folding top under power through one complete cycle in both directions.
  17. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation .