GM Service Manual Online
For 1990-2009 cars only

Caution: To reduce the risk of personal injury or vehicle damage, the deck lid needs to be fully extended upward and the hydraulic system needs to be disabled. The hydraulic bypass valve needs to be turned counterclockwise to inhibit the system from moving out of sequence.

Caution: To reduce the risk of personal injury or vehicle damage, stay clear of the folding top panels and linkage. The disconnection of a valve harness connector may cause the folding top assembly to drift to a mechanical resting position.

Scan Tool Output Control

Additional Menu Selection(s)

Description

Valve 1 Command

On/Off

The FTC module commands Valve 1 to energize or not. As the valve is energized, a click can be heard, activating the valve.

Valve 2 Command

On/Off

The FTC module commands Valve 2 to energize or not. As the valve is energized, a click can be heard, activating the valve.

Valve 3 Command

On/Off

The FTC module commands Valve 3 to energize or not. As the valve is energized, a click can be heard, activating the valve.

Valve 4 Command

On/Off

The FTC module commands Valve 4 to energize or not. As the valve is energized, a click can be heard, activating the valve.

Valve 5 Command

On/Off

The FTC module commands Valve 5 to energize or not. As the valve is energized, a click can be heard, activating the valve.

Pump Motor Direction

X/Y

The FTC module commands to operate in the X and Y directions when you select direction X or Y. The motor should operate in the requested direction.

Folding Top Learn Procedure

Calibrate

The FTC module will allow the top to operate to calibrate potentiometer sensors, setting the range, counts, for the soft limits. Once the calibration is completed, this will allow the folding top to operate.