GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1269240  Size: SH
  1. Open the rear compartment.
  2. Disconnect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Loosen the screw from the theft deterrent alarm.
  4. Lift the alarm from the bracket.
  5. Disconnect the electrical connector and remove the alarm.

Installation Procedure


    Object Number: 1269240  Size: SH
  1. Connect the electric connector to the theft deterrent alarm.
  2. Install the alarm to the bracket.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the screw on the alarm.
  5. Tighten
    Tighten the screw to 5 N·m (44 lb in).

  6. Connect the battery ground cable. Refer to Battery Negative Cable Disconnection and Connection .
  7. Close the rear compartment.