Removal Procedure
- Turn the ignition switch to the OFF position.
- Remove the center console trim plate. Refer to
Console Trim Plate Replacement
in Instrument Panel, Gages, and Console.
- Disconnect the harness electrical connector from the traction control
switch.
- Depress the retaining tabs on the traction control switch and remove the
traction control switch (1) .
Installation Procedure
- Insert the traction control switch into the
center console trim plate (1).
- Connect the harness electrical connector to the traction control switch
.
- Install the center console trim plate. Refer to
Console Trim Plate Replacement
in Instrument Panel, Gages, and Console.