GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the I/P assembly. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.

  2. Object Number: 944420  Size: SH
  3. Remove the retainer securing the left floor air outlet duct to the lower I/P beam.
  4. Disconnect the air outlet duct from the air outlet duct.

  5. Object Number: 943584  Size: SH
  6. Remove the air outlet duct retaining screws.
  7. Disconnect the air outlet duct from the HVAC module.
  8. Remove the air outlet duct.

Installation Procedure


    Object Number: 943584  Size: SH
  1. Install the air outlet duct.
  2. Connect the air outlet duct to the HVAC module.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the air outlet duct retaining screws.
  5. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  6. Connect the left floor air outlet duct to the left rear floor air outlet duct.

  7. Object Number: 944420  Size: SH
  8. Install the retainer securing the air outlet duct to the lower I/P beam.
  9. Install the I/P assembly. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.