Install the J 28467-86 Right Engine Lift Bracket to the right
cylinder head.
Remove the bolt securing the wiring harness to the left cylinder head.
Install the J 28467-87 Left Engine Lift Bracket to the left
cylinder head.
Assemble a J 28467-83 Rear
Crossbar Supports to each end of the J 28467-3 Rear Crossbar.
Position the rear crossbar assembly over the hood hinge brackets with the support
located over each hood safety catch bracket.
Assemble a J 28467-82 Front Crossbar Legs to each end of the J 28467-85
Front Crossbar.
Install the 0.5 in X 2.5 in
J 28467-10 Quick Release Pins.
Place the front crossbar assembly with supporting legs on the right and left
frame rails. Each leg should rest in the shock absorber upper mount on the frame rail.
Install the right and left sidebars over the front and rear crossbars.
Install the J 28467-1A assembly and hand tighten.
Repeat steps 12 and 13 for the remaining three corners of
the support fixture assembly.
Install the J 28467-7A lift
hook through the J 28467-6A
lift
hook bracket.
Install the ½ inch lift hook washer and the J 28467-34
lift hook wing nut onto the J 28467-7A lift hook.
Install the J 28467-6A assembled
lift hook (1) over the J 28467-84 left sidebar (2).
Adjust the J 28467-6A assembled lift hook bracket (1)
in order to align the hook with the J 28467-87 left engine lift hook
bracket.
Repeat step 18 for the right lift bracket.
Install each J 28467-7A lift hook through each engine lift hook
bracket. Ensure that the hooks do not damage the surrounding components.
Hand-tighten the J 28467-34 lift hook wing nuts securely
to remove all slack from the engine support fixture assembly.