Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Disconnect the ambient air temperature sensor electrical connector.
- Remove the push-in retainer securing the ambient air temperature sensor to the lower RH side of the radiator support.
- Remove the ambient air temperature sensor from the radiator support (1).
Installation Procedure
Important: The ambient air temperature sensor must be orientated so that the sensor probe end is inboard and the electrical connector is outboard.
- Install the ambient air temperature sensor to the lower radiator support (1).
- Install the push-in retainer to secure the ambient air temperature sensor to the radiator support.
- Connect the ambient air temperature sensor electrical connector.