Removal Procedure
- Remove the fastener attaching the top of the upper trim panel and the windshield
side garnish molding to the hinge pillar.
- Unsnap the upper trim from the hinge pillar.
- Remove the upper trim.
- Remove the lower hinge pillar trim if needed. The lower trim is part of
the sill plate. Refer to
Carpet Retainer Replacement
.
Installation Procedure
- Snap the upper trim to the hinge pillar.
- Install the fastener attaching the top of the upper trim.
- Install the lower hinge panel trim. Refer to
Carpet Retainer Replacement
.