Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the tire and wheel assemblies. Refer to
Tire and Wheel Removal and Installation
.
- Remove the stabilizer shaft link nuts from the stabilizer shaft.
- Remove the stabilizer shaft insulator clamps from the front crossmember.
- Remove the stabilizer shaft from the vehicle.
Installation Procedure
- Install the stabilizer shaft, insulator clamps and bolts to the crossmember.
- Install the stabilizer shaft links to the stabilizer shaft.
Notice: Refer to Fastener Notice in the Preface section.
- Install the stabilizer shaft link nuts.
Tighten
Tighten the stabilizer shaft link nuts to 76 N·m (56 lb ft).
- Install the stabilizer shaft insulator clamps and bolts.
Tighten
Tighten the stabilizer shaft insulator clamp bolts to 58 N·m (43 lb ft).
- Install the tire and wheel assemblies. Refer to
Tire and Wheel Removal and Installation
.
- Lower the vehicle.