Preliminary Procedures

1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
2. Remove the hood assembly. Refer to Hood Replacement .
3. Remove the supercharger. Refer to Supercharger Replacement .
4. Remove the rear section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement .
5. Remove the rear inlet duct seal. Refer to Intake Air Duct Seal Replacement .
6. Disconnect the electrical connector from the throttle body assembly.

1

Throttle Body Assembly Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Throttle Body Assembly

Notice: Do not use a cleaner which contains methyl ethyl ketone. This extremely strong solvent may damage components and is not necessary for this type of cleaning.

3

Throttle Body Gasket

Procedure

1. Always install a NEW throttle body gasket.
2. Perform the Throttle Learn procedure. Refer to Throttle Learn .