- Disconnect and remove the evaporative emissions (EVAP) hose.
- Remove the supercharger inlet duct ballstud nuts.
- Loosen the front screw clamps (1) on the inlet duct seals.
- Lift the front of the front air duct
in order to access the clean air positive crankcase ventilation (PCV) hose connector at the bottom of the front air duct.
- Disconnect the clean air PCV hose (1) from the front air duct.
- Remove the front air duct.
- Disconnect and remove the clean air PCV hose from the left camshaft cover fitting.
- Loosen the rear screw clamps (1) on the inlet duct seals.
- Remove the inlet duct seals.
- Loosen the rear screw clamp (1) on the throttle
body duct seal.
- Remove the rear air duct.
- Loosen the front screw clamp (1)
on the throttle body duct seal.
- Remove the throttle body duct seal.