| Table 1: | Body Control Module (BCM) Data List |
| Table 2: | DSCC Data List |
| Table 3: | Cruise Disengagement 1 - 4 |
| Table 4: | Engine Control Module (ECM) |
The scan tool data lists contain all the distance sensing cruise control (DSCC) related parameters that are available on the scan tool for the adaptive cruise control (ACC) system. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Vehicle .
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON / Vehicle is in Park or Neutral / Cruise On/Off is Turned Off | |||
ACC Gap Switch | BCM | Inactive / Up / Down | Inactive |
ACC Gap Switch | BCM | Volts | Varies |
Cruise Control Switch | BCM | Off / On / Error / Resume / Set | Off |
Cruise Control Switch | BCM | Volts | Varies |
Cruise Control Sw. to Batt. Voltage | BCM | Percent | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned Off | |||
Alert Indicator Message | Data | On/Off | Off |
Alignment Error | Data | Degrees | Varies |
ACC Amp. Audible Alert | Data | Ready/Not Ready | Ready |
Angle to Closest Target | Data | Degrees | 0.000° |
Auto Alignment Learn Status | Data | Aligned/Not Aligned | Aligned |
Automatic Braking Status | Data | Ready/Not Ready | Not Ready |
Clean Radar Indicator Message | Data | On/Off | Off |
Cruise Engaged Indicator Message | Data | On/Off | Off |
Cruise On / Off Switch Status | Data | Active/Inactive | Active |
Cruise Ready Indicator Message | Data | On/Off | Off |
Driver Selected Speed | Data | Km/h (mph) | 0 mph |
Driver Throttle Override Status | Data | Active/Inactive | Inactive |
Follow Speed | Data | km/h (mph) | Varies |
Following Distance | Data | 0-6 | 0-6 |
HUD Virtual Device | Data | Present/Not Present | Present |
Ignition Voltage Signal | Data | Volts | Varies |
Radar Activated | Data | Yes/No | No |
Range | Data | Meters | 150 |
Service Radar Indicator Message | Data | On/Off | Off |
Stoplamp Signal | Data | On/Off | Off |
Target Found this Ignition | Data | Yes/No | No |
Vehicle Ahead Indicator Message | Data | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned Off | |||
ABS Active | Cruise Disengagement 1-4 | Yes/No | No |
ABS Malfunction | Cruise Disengagement 1-4 | Yes/No | No |
ACC Ready | Cruise Disengagement 1-4 | Yes/No | No |
ACC Configuration | Cruise Disengagement 1-4 | Yes/No | No |
ACC Amp. Not Ready | Cruise Disengagement 1-4 | Yes/No | No |
Brake Pedal Pressure Detected | Cruise Disengagement 1-4 | Yes/No | No |
Brake Pedal Travel Detected | Cruise Disengagement 1-4 | Yes/No | No |
Brakes Overheated | Cruise Disengagement 1-4 | Yes/No | No |
Cruise Control Malfunction | Cruise Disengagement 1-4 | Yes/No | No |
Cruise Control Switch Malfunction | Cruise Disengagement 1-4 | Yes/No | No |
Cruise Control Switch Off | Cruise Disengagement 1-4 | Yes/No | No |
ECM Cruise Disengage | Cruise Disengagement 1-4 | Yes/No | No |
HUD Malfunction | Cruise Disengagement 1-4 | Yes/No | No |
Internal DSCC Overtemp | Cruise Disengagement 1-4 | Yes/No | No |
Invalid Vehicle Speed | Cruise Disengagement 1-4 | Yes/No | No |
Not in Run Mode | Cruise Disengagement 1-4 | Yes/No | No |
Radar Needs Cleaning | Cruise Disengagement 1-4 | Yes/No | No |
Supply Voltage Out of Range | Cruise Disengagement 1-4 | Yes/No | No |
Yaw Rate Invalid | Cruise Disengagement 1-4 | Yes/No | No |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON / Vehicle is in Park or Neutral / Cruise On / Off Switch is Turned Off | |||
Cruise Control Switch | Engine Data | Invalid/Cancel/Set/Coast/Resume/Accel./On/Off | On |
Cruise Control Active | Engine Data | Yes/No | No |
Cruise Disengage 1-8 History | Engine Data | Last (8) reasons for cruise control disengagement | Varies |
Cruise Inhibit Reason | Engine Data | Reason for cruise inhibit | Varies |
Cruise Inhibit Signal Command | Engine Data | On/Off | Off |
Engine Speed | Engine Data | RPM | Varies |
Initial Brake Apply Signal | Engine Data | Applied/Released | Released |
Moderate Brake Apply Signal | Engine Data | Applied/Released | Released |
Stoplamp Pedal Switch | Engine Data | Applied/Released | Released |
Vehicle Speed Sensor | Engine Data | km/h (mph) | 0 km/h (0 mph) |
