For 1990-2009 cars only
Removal Procedure
- Disable the SIR coil. Refer to SIR Disabling and Enabling.
- Remove the steering wheel from the column. Refer to Steering Wheel Replacement .
- Remove the steering column from the vehicle. Refer to Steering Column Replacement .
- Inspect the steering column for accident damage. Refer to Steering Column Accident Damage Inspection .
- Remove the upper and lower trim cover. Refer to Steering Column Trim Covers Replacement .
- Disconnect all connectors attached to the wire harness assembly.
- Slide the bulkhead connector out from the column shift and tilt motor bracket assembly.
Caution: Refer to SIR Caution in the Preface section.
Installation Procedure
- Slide the bulkhead connector into the column shift and tilt motor bracket assembly.
- Connect all of the connectors to the wire harness assembly.
- Install the upper and lower trim cover. Refer to Steering Column Trim Covers Replacement .
- Install the steering column into the vehicle. Refer to Steering Column Replacement .
- Install the steering wheel onto the steering column. Refer to Steering Wheel Replacement .
- Enable the SIR system. Refer to SIR Disabling and Enabling.
Caution: Improper routing of the wire harness assembly may damage the inflatable restraint steering wheel module coil. This may result in a malfunction of the coil, which may cause personal injury.
