GM Service Manual Online
For 1990-2009 cars only

Door Lock Control Module Scan Tool Information Driver Door Switch

Driver Door Switch Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON

Battery Voltage Signal

--

Varies

This displays volts. This is the voltage input supplied to the driver door switch.

Door Lock Switch

--

Idle

The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door lock switch.

Driver LF Window Switch

--

Idle

The scan tool displays Idle, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch.

Driver RF Window Switch

--

Idle

The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right front window switch.

Mirror Direction Switch

--

Idle

The scan tool displays Idle, Right & Down, Right & Up, Right, Left & Down, Left & Up, Left, Up, or Down. This is the state of the mirror direction switch.

Mirror Fold Switch

--

Inactive

The scan tool displays Active or Inactive. This is the state of the mirror fold switch.

Mirror Select Switch

--

Off

The scan tool displays Invalid, Passenger, Driver or Off. This is the state of the mirror select switch.

Door Lock Control Module Scan Tool Information Passenger Door Module

Table 1: Passenger Door Module Scan Tool Data Parameters
Table 2: Passenger Door Module Scan Tool Output Controls

Passenger Door Module Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON

Battery Voltage Signal

--

Varies

This displays volts. This is the current battery voltage signal.

Door Lock Switch

--

Idle

The scan tool displays Idle, Unlock, Lock or Invalid. This is the state of the door lock switch.

Door Switch Backlight Command

--

Varies

This displays %. This is the passenger door switch backlighting percentage.

Driver Mirror Fold Motor Command

--

Idle

The scan tool displays Idle, Retract or Extend. This is the state of the driver mirror fold motor.

Ext. Psgr. Door Handle Switch

--

Inactive

The scan tool displays Active or Inactive. This is the state of the exterior passenger door handle switch.

Exterior Courtesy Lamp Status

--

Off

The scan tool displays On or Off. This is the state of the exterior courtesy lamp.

Int. Psgr. Door Handle Switch

--

Inactive

The scan tool displays Active or Inactive. This is the state of the interior passenger door handle switch.

Front Psgr. Window Position

--

Varies

This displays Counts. This is the passenger front window position measured in counts.

Front Psgr. Window Switch

--

Idle

The scan tool displays Idle, Up, Express Up, Down or Express Down. This is the state of the front passenger window switch.

Lock Switch Indicator Command

--

Off

The scan tool displays On or Off. This is the state of the lock switch indicator.

Memory 1 Mirror Horizontal Position

--

Varies

This displays Counts. This is the driver mirror vertical position stored in memory.

Memory 1 Mirror Horizontal Position

--

Varies

This displays Volts. This is the driver mirror vertical position stored in memory.

Memory 2 Mirror Horizontal Position

--

Varies

This displays Counts. This is the passenger mirror vertical position stored in memory.

Memory 2 Mirror Horizontal Position

--

Varies

This displays Volts. This is the driver mirror passenger position stored in memory.

Memory 1 Mirror Vertical Position

--

Varies

This displays Counts. This is the driver mirror vertical position stored in memory.

Memory 1 Mirror Vertical Position

--

Varies

This displays Volts. This is the driver mirror vertical position stored in memory.

Memory 2 Mirror Vertical Position

--

Varies

This displays Counts. This is the passenger mirror vertical position stored in memory.

Memory 2 Mirror Vertical Position

--

Varies

This displays Volts. This is the passenger mirror vertical position stored in memory.

Passenger Window Motor Command

--

Idle

The scan tool displays Idle, Invalid, Down, Up, Express Up or Express Down. This is the state of the passenger window motor.

Psgr. Mirror Fold Motor Command

--

Idle

The scan tool displays Idle, Retract or Extend. This is the state of the passenger mirror fold motor.

Psgr. Mirror Heater

--

Inactive

The scan tool displays Active or Inactive. This is the state of the passenger heated mirror.

Psgr. Mirror Horizontal Position

--

Varies

This displays Counts. This is the current passenger mirror horizontal position measured in counts.

Psgr. Mirror Horizontal Position

--

Varies

This displays Volts. This is the current passenger mirror horizontal position measured in volts.

Psgr. Mirror Motors Command

--

Idle

The scan tool displays Idle, Right, Left, Up, Right & Up, Left & Up, Down, Right & Down or Left & Down. This is the state of the passenger mirror motors.

Psgr. Mirror Vertical Position

--

Varies

This displays Counts. This is the current passenger mirror vertical position measured in counts.

Psgr. Mirror Vertical Position

--

Varies

This displays Volts. This is the current passenger mirror vertical position measured in volts.

Window Motor Sensor 1

--

Inactive

The scan tool displays Active or Inactive. This is the state of the window motor sensor 1.

Window Motor Sensor 2

--

Inactive

The scan tool displays Active or Inactive. This is the state of the window motor sensor 2.

Window Normalization

--

Varies

The scan tool displays Yes or No. This is the state of the passenger window motor normalization.

Passenger Door Module Scan Tool Output Controls

Output Control

Description

Door Switch Backlight

This output control is used to control the door switch backlighting.

Exterior Courtesy Lamp

This output control is used to control the exterior courtesy lamps.

Front Psgr. Window Motor

This output control is used to command the front passenger window motor UP or DOWN.

Lock Switch Indicator

This output control is used to command the lock switch indicator ON or OFF.

Mirror Fold

This will command the passenger mirror to fold and unfold.

Mirror Heater

This will command the passenger mirror heater ON and OFF.

Psgr. Mirror Horizontal Motor

This will command the passenger mirror left and right.

Psgr. Mirror Vertical Motor

This will command the passenger mirror up and down.

Door Lock Control Module Scan Tool Information Driver Door Module

Table 1: Driver Door Module Scan Tool Data Parameters
Table 2: Driver Door Module Scan Tool Output Controls

Driver Door Module Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON

Battery Voltage Signal

--

Varies

This displays volts. This is the current battery voltage signal.

Deadbolt Actuator Command

--

Idle

The scan tool displays Idle, Unlock, Lock or Invalid. This is the state of the deadbolt actuator.

Door Switch Backlight Command

--

Varies

This displays %. This is the passenger door switch backlighting percentage.

Deadbolt Actuator Command

--

Idle

The scan tool displays Idle, Unlock, Lock or Invalid. This is the state of the deadbolt actuator.

Driver Mirror Heater

--

Inactive

The scan tool displays Active or Inactive. This is the state of the driver heated mirror.

Driver Mirror Horizontal Position

--

Varies

This displays Counts. This is the current driver mirror horizontal position measured in counts.

Driver Mirror Horizontal Position

--

Varies

This displays Volts. This is the current passenger mirror driver position measured in volts.

Driver Mirror Motors Command

--

Idle

The scan tool displays Idle, Right, Left, Up, Right & Up, Left & Up, Down, Right & Down or Left & Down. This is the state of the driver mirror motors.

Driver Mirror Vertical Position

--

Varies

This displays Counts. This is the current driver mirror vertical position measured in counts.

Driver Mirror Vertical Position

--

Varies

This displays Volts. This is the current driver mirror vertical position measured in volts.

Driver Window Motor Command

--

Idle

The scan tool displays Idle, Invalid, Down, Up, Express Up or Express Down. This is the state of the driver window motor.

Driver Window Position

--

Varies

This displays Counts. This is the driver front window position measured in counts.

Ext. Driver Door Handle Switch

--

Inactive

The scan tool displays Active or Inactive. This is the state of the exterior driver door handle switch.

Exterior Courtesy Lamp Status

--

Off

The scan tool displays On or Off. This is the state of the exterior courtesy lamp.

Int. Driver Door Handle Switch

--

Inactive

The scan tool displays Active or Inactive. This is the state of the interior driver door handle switch.

Lock Switch Indicator Command

--

Off

The scan tool displays On or Off. This is the state of the lock switch indicator.

Memory 1 Mirror Horizontal Position

--

Varies

This displays Counts. This is the driver mirror vertical position stored in memory.

Memory 1 Mirror Horizontal Position

--

Varies

This displays Volts. This is the driver mirror vertical position stored in memory.

Memory 2 Mirror Horizontal Position

--

Varies

This displays Counts. This is the passenger mirror vertical position stored in memory.

Memory 2 Mirror Horizontal Position

--

Varies

This displays Volts. This is the driver mirror passenger position stored in memory.

Memory 1 Mirror Vertical Position

--

Varies

This displays Counts. This is the driver mirror vertical position stored in memory.

Memory 1 Mirror Vertical Position

--

Varies

This displays Volts. This is the driver mirror vertical position stored in memory.

Memory 2 Mirror Vertical Position

--

Varies

This displays Counts. This is the passenger mirror vertical position stored in memory.

Memory 2 Mirror Vertical Position

--

Varies

This displays Volts. This is the passenger mirror vertical position stored in memory.

Window Motor Sensor 1

--

Inactive

The scan tool displays Active or Inactive. This is the state of the window motor sensor 1.

Window Motor Sensor 2

--

Inactive

The scan tool displays Active or Inactive. This is the state of the window motor sensor 2.

Window Normalization

--

Varies

The scan tool displays Yes or No. This is the state of the passenger window motor normalization.

Driver Door Module Scan Tool Output Controls

Output Control

Description

Door Deadbolt Lock/Unlock

This command will lock and unlock the door dead bolt actuators.

Door Switch Backlight

This output control is used to control the door switch backlighting.

Driver Mirror Horizontal Motor

This output control is used to control the driver mirror horizontal motor.

Driver Mirror Vertical Motor

This output control is used to control the driver mirror vertical motor.

Driver Window Motor

This test will command the front window both Up and Down.

Exterior Courtesy Lamp

This output control is used to control the exterior courtesy lamps.

Lock Switch Indicator

This output control is used to command the lock switch indicator ON or OFF.

Mirror Heater

This will command the driver mirror heater ON or OFF.