Table 1: | Driver Position Module Scan Tool Data Parameters |
Table 2: | Driver Position Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Current | -- | Varies | This displays amps. |
Driver Seat Front Vertical Sensor | -- | Varies | This displays Volts. This is the current front vertical position measured in volts. |
Driver Seat Horizontal Sensor | -- | Varies | This displays Volts. This is the current horizontal position measured in volts. |
Driver Seat Rear Vertical Sensor | -- | Varies | This displays Volts. This is the current rear vertical position measured in volts. |
Driver Seat Recline Sensor | -- | Varies | This displays Volts. This is the current recline position measured in volts. |
Front Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical downward switch. |
Front Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor downward. |
Front Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical motor upward. |
Front Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the front vertical upward switch. |
Horizontal Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal forward switch. |
Horizontal Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor forward. |
Horizontal Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal motor rearward. |
Horizontal Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the horizontal rearward switch. |
Horizontal Value | -- | Varies | This displays Volts. This is the horizontal value stored in memory. |
Memory 1 Select Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the memory 1 switch. |
Memory 2 Select Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the memory 2 switch. |
Rear Vertical Downward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical downward switch. |
Rear Vertical Motor Downward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor downward. |
Rear Vertical Motor Upward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical motor upward. |
Rear Vertical Upward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the rear vertical upward switch. |
Recline Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline forward switch. |
Recline Motor Forward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor forward. |
Recline Motor Rearward | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline motor rearward. |
Recline Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the recline rearward switch. |
Seat Front Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical position. |
Seat Front Vertical Exit Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat front vertical exit position. |
Seat Horizontal Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal position. |
Seat Horizontal Exit Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat horizontal exit position. |
Seat Rear Vertical Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical position. |
Seat Rear Vertical Exit Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat rear vertical exit position. |
Seat Recline Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat recline position. |
Seat Recline Exit Position | -- | Varies | This displays Volts. This is the voltage stored in memory for the seat recline exit position. |
Telescope Forward Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope forward. |
Telescope Forward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope forward switch. |
Telescope Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope rearward switch. |
Telescope Rearward Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the telescope rearward. |
Tilt Down Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt down. |
Tilt Down Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt down switch. |
Tilt Up Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt up. |
Tilt Up Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the tilt up switch. |
Output Control | Description |
---|---|
Column Calibration | This output control is used to calibrate the steering column. |
Front Up/Down | This output control is used to command the driver seat motor Up and Down. |
Memory 1 Recall | This output control is used to command the driver seat to move into the position stored in memory 1. |
Memory 2 Recall | This output control is used to command the driver seat to move into the position stored in memory 2. |
Memory Exit 1 Recall | This output control is used to command the driver seat to move into the position stored in exit memory 1. |
Memory Exit 2 Recall | This output control is used to command the driver seat to move into the position stored in exit memory 2. |
Rear Up/Down | This output control is used to command the driver seat rear Up and Down. |
Recline Forward/Rearward | This output control is used to command the driver seat reclining forward and rearward. |
Seat Forward/Rearward | This output control is used to command the driver seat forward and rearward. |