The rear suspension uses a single lightweight fiberglass transverse spring
mounted to the crossmember and lower control arms. The following lightweight aluminum
components are used throughout the rear suspension:
• | Rear suspension knuckles |
• | Rear suspension toe links |
• | Drive shaft support tube |
The shock absorbers attach at the upper end to the frame and at the lower end,
to the lower control arm. Shock absorbers help keep the wheels in contact
with the road surface under most road conditions. Shock absorbers reduce
crash-through at full jounce and rebound.
The electronically controlled shock absorbers are gas charged to reduce aeration
(foaming) of the shock fluid. Aeration of the shock fluid results in poor
damping control.