GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 922511 Size: SH
  3. Remove the stabilizer shaft clamps, bolts and nuts retaining the shaft to the crossmember.
  4. Remove the stabilizer shaft insulators from the stabilizer shaft.

Installation Procedure

    Object Number: 922511 Size: SH
  1. Install the stabilizer shaft insulators to the stabilizer shaft.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft insulator clamps to the stabilizer shaft and the crossmember.

    3. Tighten

        • Tighten the stabilizer shaft insulator clamp bolts to 100 N·m (74 lb ft).
        • Tighten the stabilizer shaft insulator clamp nuts to 95 N·m (70 lb ft).
  3. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.