For 1990-2009 cars only
Removal Procedure
- Turn the ignition switch to the ACCY position.
- Turn the wiper switch to the DELAY position.
- Turn the ignition OFF when the wipers are in the mid-wipe position.
- Pull up on the wiper blade release tang, and slide the wiper blade out from the inside radius of the wiper arm.
- Remove the wiper blade from the wiper arm, by guiding it out through the opening in the blade.
Installation Procedure
- Install the hook of the wiper arm through the opening in the wiper blade.
- Position the wiper blade pivot into the inside radius of the wiper arm hook.
- Press the wiper blade pivot into the wiper arm hook until the pivot locks into the wiper arm.
- Inspect the wipers for proper operation.
Important: The driver side wiper blade will have the integral air foil as part of the assembly.
