Removal Procedure
- Remove the windshield side garnish moldings.
1.1. | Grasp the windshield side garnish molding. |
1.2. | Pull the molding with its retainers from the windshield frame. |
- Remove the inside rearview mirror.
2.1. | Disconnect the inside rearview mirror electrical connector. |
2.2. | Twist and slide the mirror up off the mirror bracket. |
- Remove
the sunshades. Refer to
Sunshade Replacement
.
- Grasp the upper garnish molding and pull
the garnish molding with its retainers from the windshield frame.
Installation Procedure
- Position the sunshade electrical connectors through the openings in the
upper garnish molding.
- Position the upper garnish molding with
its retainers to the holes in the windshield frame.
- Starting in the center push on the upper garnish molding snapping the
molding retainers into the windshield frame.
- Install the sunshades. Refer to
Sunshade Replacement
.
- Slide the rearview mirror down
onto the bracket.
- Connect the electrical connector.
- Install the windshield side garnish moldings.
7.1. | Position the side garnish molding behind the lock pillar molding and retainer. |
7.2. | Position the side garnish molding with its retainers to the holes in the
windshield frame. |
7.3. | Push on the molding snapping the retainers into the windshield frame. |