Preliminary Procedures

1. Install the 1-2-3-4 and 3-5 reverse clutch housing with the 1-2-3-4 clutch plates installed, onto the torque converter housing.
2. Install the DT 47868-2 onto the torque converter housing.
3. Install DT 47868-1 and DT-47868-3 onto the 1-2-3-4 clutch backing plate.
4. Install the J 26900-13 onto DT 47868-2 .
5. Attach the J 8001 to the J 26900-13 and zero out the dial indicator on the DT 47868-1 .

Special Tools

1

1-2-3-4 Clutch Apply Passage

Tip
Apply compressed air to the apply passage hole, at least 3 times and observe the dial indicator measurement each time. This action "fluffs" the clutch plates to ensure an accurate measurement. Refer to Clutch Backing Plate Retaining Ring Specifications .