J 28467-B Universal Engine Support Fixture
Important: It is not necessary to fully tighten the cradle nuts to specification at this time. They will be removed again at a later step. Tighten until the cradle mounting nuts contacts the engine cradle.
Important: It is necessary to elevate the engine assembly slightly to allow clearance for the RH engine mount bracket removal.
Important: Note the position of the TOC lines to ensure proper installation.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the nuts to 12 N·m (9 lb ft).
Important: When installing the engine mount, be sure to have the locating dowel in the correct position.
Tighten
Tighten the bolts to 58 N·m (43 lb ft).
Tighten
Tighten the nut to 58 N·m (43 lb ft).
Tighten
Tighten the nut to 58 N·m (43 lb ft).
Tighten
Tighten the bolts to 50 N·m (37 lb ft).
Important: Tighten in sequence.
Tighten
Tighten the bolt to 25 N·m (18 lb ft).
Tighten
Tighten the bolt to 25 N·m (18 lb ft).