Removal Procedure
- Open the rear compartment.
- Lower the rear compartment partition.
- Remove the rear window retaining bolts which secure the lower molding to the folding top.
- Remove the lower molding out of the rear compartment.
Installation Procedure
- Position the lower molding to the folding top through the rear compartment.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining bolts to secure the molding to the folding top.
Tighten
Tighten the bolts to 2.5 N·m (22 lb in).
- Raise the rear compartment partition and latch the partition in place.
- Close the rear compartment.