Removal Procedure
- Remove the back up lamp assembly. Refer to
Backup Lamp Replacement
.
- Remove the screws (2) attaching the license lamp (1) to the rear compartment lid.
- Remove the license lamp from the rear compartment lid.
- Remove the bulb/socket from the license lamp.
Installation Procedure
- Install the license lamp bulb/socket to the license lamp.
- Postion the license lamp (1) to the rear compartment lid.
Notice: Refer to Fastener Notice in the Preface section.
- Install the license lamp screws (2).
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Inspect the license lamp for proper operation.
- Install the back up lamp. Refer to
Backup Lamp Replacement
.