Removal Procedure
- Open the hood.
- Remove
the adjustable front hood bumpers (1) from the vehicle.
- Remove the front hood bumpers (2) from the vehicle.
Installation Procedure
- Install
the front hood bumpers (2) to the vehicle.
- Install the adjustable front hood bumpers (1) to the vehicle.
- Adjust the front hood bumpers (1) so that the hood is flush with
the fenders.
- After the adjustment is performed, a sufficient load must
remain on the front hood bumpers to eliminate hood flutter. This can be achieved by
lowering the hood latch an additional 4 mm (1/8 in), for front flutter.
- Close the hood.