Removal Procedure
- Open the hood.
- Note the location and remove the seal (1) from the fender (2).
- Remove all remaining adhesive.
Installation Procedure
- Clean all mating surfaces with a lint-free rag using a naptha solvent or equivalent.
Important: Mating surfaces must be dry before applying the new fender seal.
- The adhesive and mating surfaces temperature must be between 19-43°C (66-110°F).
- Remove the protective paper backing from the seal.
- Position the seal (1) to the fender (2).
- Press firmly to secure the seal to the fender.
- Close the hood.