| Table 1: | Instrument Panel Cluster Scan Tool Data Parameters |
| Table 2: | Instrument Panel Cluster Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Engine ON | |||
Air Bag Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the air bag indicator command. |
Average Speed | -- | Varies | The scan tool displays km/h (mph). This is the average speed of the vehicle. |
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Brake Fluid Level Switch | -- | Off | The scan tool displays On or Off. This is the state of the brake fluid level switch. |
Brake Warning Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the brake warning indicator command. |
Chime | -- | Varies | The scan tool displays On or Off. This is the state of the vehicle chime. |
Dim Down Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the dim down switch. |
Dim Select Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the dim select switch. |
Dim Up Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the dim up switch. |
Dome Lamp Switch | -- | Off | The scan tool displays On or Off. This is the state of the dome lamp switch. |
ECT | -- | Varies | This displays °C (°F). This is the current engine coolant temperature (ECT). |
Engine Oil Life | -- | Varies | This displays %. This is the engine oil life remaining measured in percent. |
Engine Oil Pressure | -- | Varies | This displays kPa (psi). This is the current engine oil pressure. |
Engine Speed Signal | -- | Varies | This displays RPM. This is the current engine speed. |
Front Fog Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the front fog indicator command. |
High Beam Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the high beam indicator command. |
Information Down Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the information down switch. |
Information Up Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the information up switch. |
Left Turn Signal | -- | Off | The scan tool displays On or Off. This is the state of the left turn signal. |
Odometer | -- | Varies | This displays km (mi). This is the current odometer reading. |
Options Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the options switch. |
Park Brake Switch | -- | Released | The scan tool displays Applied or Released. This is the state of the park brake switch. |
Park Lamps Signal | -- | Off | The scan tool displays On or Off. This is the state of the park lamps signal. |
Rear Fog Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the rear fog indicator command. |
Reset Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the reset switch. |
Right Turn Signal | -- | Off | The scan tool displays On or Off. This is the state of the right turn signal. |
Seat Belt Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the seat belt indicator command. |
Security Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the security indicator command. |
Vehicle Speed Signal | -- | 0 km/h (0 mph) | This displays km/h (mph). This is the current vehicle speed. |
Windshield Washer Fluid Switch | -- | OK | The scan tool displays OK or Low Fluid. This is the state of the windshield washer fluid switch. |
Output Control | Description |
|---|---|
Coolant Gauge Sweep Test | This output control is used to sweep the coolant gauge when ON is selected. |
Display Test | This output control is used to command all indicators ON or OFF. |
Fuel Gauge Sweep Test | This output control is used to sweep the fuel gauge when ON is selected. |
Oil Gauge Sweep Test | This output control is used to sweep the oil gauge when ON is selected. |
Speed Gauge Sweep Test | This output control is used to sweep the speedometer when ON is selected. |
Tach Gauge Sweep Test | This output control is used to sweep the tachometer when ON is selected. |
Volts Gauge Sweep Test | This output control is used to sweep the volts gauge when ON is selected. |
