GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Radio Antenna Module Replacement

Removal Procedure

    Object Number: 1292919 Size: SH
  1. Open the rear compartment lid.
  2. Remove the antenna ground plate. Refer to Antenna Ground Plate Replacement .
  3. Disconnect the coaxial lead and the electrical lead to the antenna module.
  4. Remove the screw that retains the antenna module to the antenna ground plate.

    5. Object Number: 1292925 Size: SH
  5. Remove the antenna module from the vehicle.

Installation Procedure

    Object Number: 1292925 Size: SH
  1. Install the antenna module into position on the antenna ground plate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the antenna module retaining screws.

    3. Tighten
    Tighten the screws to 1.8 N·m (16 lb in).

  3. Connect the coaxial cable and the electrical lead to the antenna module.
  4. Install the antenna ground plate. Refer to Antenna Ground Plate Replacement .

    5. Object Number: 1292919 Size: SH
  5. Close the rear compartment lid.