GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Seats 🢒 Power Seats 🢒 Driver Seat Adjuster Replacement

Removal Procedure
  1. Remove the seat. Refer to Driver and Passenger Seat Replacement .
  2. Remove the seat cushion cover. Refer to Driver Seat Cushion Pad Replacement .

    3. Object Number: 1247931 Size: SH
  3. Reposition the lumbar pump, if equipped.

    4. Remove the tie straps and reposition the pump and pouch up through the seat support wires .

  4. Disconnect the seat belt harness from the seat frame.
  5. Remove the memory seat control module.

    6. Object Number: 71217 Size: SH
  6. Remove the bolts mounting the seat to the adjuster.
  7. Remove the adjuster.
  8. Transfer parts as necessary.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 71217 Size: SH
  1. Install the adjuster to the seat.

    2. Tighten
    Tighten the bolts to 24 N·m (18 lb ft).


    Object Number: 1289045 Size: SH
  2. Install the lumbar pump, if equipped. Secure the pump to the torque tube with tie straps.
  3. Connect the seat belt harness to the seat frame.
  4. Install the memory seat control module.
  5. Install the seat cushion cover. Refer to Driver Seat Cushion Pad Replacement .
  6. Install the seat. Refer to Driver and Passenger Seat Replacement .
  7. Calibrate the seat. Refer to Memory Seat Calibration .