GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1247641  Size: SH
  1. Remove the console trim plate. Refer to Console Trim Plate Replacement .
  2. Grasp the I/P accessory trim plate at the top edge and pull rearward to disengage the retaining clips.
  3. Important: Do NOT damage the metal accent trim on the trim plate.

  4. Disconnect the electrical connector at the hazard flasher switch.
  5. Remove the hazard flasher switch from the trim plate.

Installation Procedure


    Object Number: 1247641  Size: SH
  1. Install the hazard flasher switch to the trim plate.
  2. Connect the electrical connector to the hazard flasher switch.
  3. Install the I/P accessory trim plate securing the plate into the retaining clips.
  4. Install the console trim plate. Refer to Console Trim Plate Replacement .