• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The inflatable restraint sensing and diagnostic module (SDM) contains sensing devices that converts vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0051 to set.
Ignition voltage is between 9-16 volts.
• | The SDM detects a frontal impact of sufficient force to warrant deployment of the frontal modules. |
• | The SDM detects a side impact of sufficient force to warrant deployment of a side impact module. |
• | The SDM requests the instrument panel cluster (IPC) to illuminate the AIR BAG indicator. |
• | The SDM records crash data. |
DTC B0051 is a latched code. You cannot clear a latched code. Replace the SDM after following the instructions.
SIR System Description and Operation
Control Module References for scan tool information
With a scan tool, verify DTC B0051 is not set.
⇒ | If DTC is set, replace the SDM. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
• | Control Module References for SDM replacement, setup, and programming |