GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 XLR 🢒 Preface 🢒 Cautions and Notices 🢒 Driver Knee Bolster Bracket Replacement

Removal Procedure
  1. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .

    2. Object Number: 1224676 Size: SH

    Important: The following step must be performed to assure proper trim fits during installation.

  2. Mark the location of the driver knee bolster bracket.
  3. Remove the screws retaining the driver knee bolster bracket to the steering column bracket.
  4. Remove the driver knee bolster bracket.

Installation Procedure

    Object Number: 1224676 Size: SH
  1. Install the driver knee bolster bracket into position as marked prior to removal.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screws which retain the driver knee bolster bracket to the steering column bracket.

    3. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  3. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .