Removal Procedure
- Remove the instrument panel (I/P) trim pad. Refer to
Instrument Panel Trim Pad Replacement .
- Remove 2 plastic rivet retainers which secure the global positioning system (GPS) antenna to the I/P carrier.
- Remove the radio. Refer to
Radio Replacement .
- Remove the GPS antenna from the retaining clip at the rear of the radio.
- Remove the GPS antenna loop lead from the HVAC duct work.
- Route the GPS antenna with the coaxial antenna lead from the I/P carrier.
Installation Procedure
- Install the GPS antenna and the coaxial lead to the I/P carrier and route the coaxial lead to the radio.
- Install the GPS antenna loop lead to the HVAC duct work.
- Install the GPS antenna to the retaining clip at the rear of the radio.
- Install the radio. Refer to
Radio Replacement .
- Install 2 plastic rivets to secure the GPS antenna to the I/P carrier.
- Install the I/P trim pad. Refer to
Instrument Panel Trim Pad Replacement .