For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC B2465: Navigation Compact Disk Player - Data ErrorCircuit Description
The circuitry is internal to the navigation radio. The system does not function when an incorrect CD or DVD is inserted into the navigation system.
Conditions for Running the DTC
| • | Radio ON. |
| • | Battery voltage must be between 9-16 volts. |
Conditions for Setting the DTC
The navigation radio has determined an incorrect CD has been inserted.
Action Taken When the DTC Sets
| • | No map appears on the display. |
| • | Navigation buttons do not function. |
| • | PLEASE INSERT MAP DVD message appears on the display. |
Conditions for Clearing the DTC
| • | The condition responsible for setting the DTC no longer exists. |
| • | A history DTC will clear once 50 consecutive malfunction-free ignition cycles have occurred. |
Reference Information
Schematic Reference
Radio/Navigation System Schematics
Connector End View Reference
Description and Operation
Navigation System Description and Operation
Electrical Information Reference
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
Note: The DVD installed must be a map DVD as defined for this system.
- Ignition ON, with a scan tool clear all DTCs.
- Ignition ON, install a known good MAP DVD and operate the system within the Condition for Running the DTC.
| ⇒ | If the DTC resets, replace the radio. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for Radio replacement, setup, and programming
