• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The circuitry is internal to the navigation radio. The Navigation ECU performs self diagnostics and sets the DTC if any malfunctions are detected.
• | Radio ON. |
• | Battery voltage must be between 9-16 volts. |
The navigation radio is unable to write to memory and the test detects a computation error.
• | Black screen and the audio cannot be changed. |
• | The TV screen adjustment settings change to the default settings. |
• | The navigation screens may or may not be available. |
• | The condition responsible for setting the DTC no longer exists. |
• | A history DTC will clear once 50 consecutive malfunction-free ignition cycles have occurred. |
DTC B2468 may be stored as a history DTC with out affecting the operation of the module. If stored as a history DTC and not retrieved as a current DTC, do not replace the module.
Radio/Navigation System Schematics
Navigation System Description and Operation
Control Module References for scan tool information
⇒ | If the DTC resets, replace the radio. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for Radio replacement, setup, and programming