GM Service Manual Online
For 1990-2009 cars only
Makes
๐ข
Cadillac
๐ข
2009
๐ข
XLR
๐ข
Engine
๐ข
Engine Cooling
๐ข Cooling Fan Control Module Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the cooling fan control module electrical connector.
Remove the cooling fan control module retaining bolt.
Remove the cooling fan control module from the vehicle.
Installation Procedure
Install the cooling fan control module to the vehicle.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the cooling fan control module retaining bolt and tighten to
6 Nยทm (53 lb in)
.
Connect the cooling fan control module electrical connector.
Lower the vehicle.
Refer to
Control Module References
for programming and setup information.