GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Engine 🢒 Engine Cooling 🢒 Water Pump and Generator Drive Belt Tensioner Replacement

Object Number: 1673287 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
  3. Remove the water pump and generator drive belt. Refer to Water Pump and Generator Belt Replacement.

1

Drive Belt Tensioner Assembly Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Drive Belt Tensioner Assembly

Tip

    • Rotate the tensioner in a clockwise direction during belt removal and installation.
    • Remove and install the tensioner and bolt as an assembly.
    • Ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the camshaft actuator housing during installation and torque procedure.