GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Engine 🢒 Engine Mechanical - 4.4L 🢒 Floor Panel Tunnel Panel Reinforcement Replacement

Removal Procedure

    Object Number: 67894 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the intermediate pipe. Refer to Intermediate Pipe Replacement.
  3. Remove the floor panel tunnel panel reinforcement bolts.
  4. Remove the reinforcement.

Installation Procedure

    Object Number: 71468 Size: SH
  1. Install the reinforcement into position.
  2. Install the bolt into the reinforcement locating hole (1).
  3. Install the bolt into the reinforcement slotted hole (2)

    4. Caution: Refer to Fastener Caution in the Preface section.

    Note: ALL of the floor panel tunnel panel reinforcement bolts must be installed and torqued to specifications, the reinforcement functions as a part of the vehicle body structure.

  4. Install the remaining bolts and tighten to 10 N·m (89 lb in).
  5. Install the intermediate pipe. Refer to Intermediate Pipe Replacement.
  6. Lower the vehicle.