GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver Seat Cushion Ventilation Heating and Cooling Blower Replacement

Removal Procedure
  1. Remove the seat. Refer to Driver or Passenger Seat Replacement.
  2. Cut the tie straps to the blower from the seat ductwork.

    3. Object Number: 1288832 Size: SH
  3. Disconnect the electrical connection to the blower assembly.
  4. Remove the screws from the blower to the seat bottom.
  5. Remove the blower assembly from the seat bottom.

Installation Procedure

    Object Number: 1288832 Size: SH
  1. Install the blower assembly to the seat bottom.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the blower assembly screws to the seat bottom and tighten to 2.5 N·m (22 lb in).
  3. Connect the electrical connection to the blower assembly.
  4. Install the seat ductwork to the blower. Secure the ductwork with new tie straps.
  5. Install the seat. Refer to Driver or Passenger Seat Replacement.