GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the door trim panel. Refer to Door Trim Panel Replacement.

  3. Object Number: 1226209  Size: SH
  4. Remove the retaining bolts from the inflatable restraint side impact sensor.
  5. Remove the sensor from the vehicle.

Installation Procedure


    Object Number: 1226209  Size: SH
  1. Install the sensor from the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the retaining bolts to the inflatable restraint side impact sensor and tighten to 9 N·m (80 lb in).
  4. Install the door trim panel. Refer to Door Trim Panel Replacement.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling.